Electro river

Kuulutusi: 3 Hinnang: 1 2 3 4 5 0.0

Esita päring

Sinu nimi:

Sinu e-post:

   

Sinu küsimus:

Märkus: HTML kood ei ole lubatud!

Sisestage pildil nähtav kontrollkood:

The Electro River LiPo with an output of 7.4V fits most CYMA and Marui standard AEP pistols - CM.12x series - without any connector modification.

Please note that the AEP pistol still requires a mosfet, as the battery energy can be too high and damage your AEP.

Attention: The battery does not fit in the LiPo versions of the Cyma models - CM.12xS series .

Electro River sets new quality standards in the lithium polymer battery market. The manufacturer's goal is to create a product whose quality can compete with even the best players on the market, while maintaining an attractive price . The range includes high-capacity battery packs with low weight and the smallest format.

High-quality materials and robust Tamiya and Dean connections guarantee maximum utilization of the energy potential of the respective LiPo battery. Each cell has a Nanosafe fuse to minimize the risk of fire in the event of damage.

At the same time, Subzero Power technology has increased low-temperature efficiency. Even at sub-zero temperatures, self-discharge is very low. Unused LiPos lose about 3-5% energy per month.

With the above functions, up to 20% more charge cycles could be achieved than with other LiPo batteries and this at a very attractive price for both beginners and advanced LiPo battery users .

It is important to remember not to discharge a LiPo pack to levels less than 3V per cell and not to overcharge above 4.2V per cell.

Properly used, a LiPo lasts an average of 500-700 charge cycles . An important factor is the temperature at which LiPo batteries can perform in the factory. Unlike other rechargeable batteries and batteries, Li-Pos work well even at low temperatures.

However, they should be charged at room temperature and with at least 70% charge capacity . To keep LiPo batteries in good condition, your LiPo packs should always be charged using a good LiPo charger with built-in balancers .

You can find a large selection of high- quality chargers with a balancer function and LiPo alarms (as additional protection against deep charging that can damage the LiPo) in our shop in the category http://www.airsoftarms.eu/de/tuning-zubehoer/ladegeraete /

Product Specifications:

• Dimensions: 84 x 24 x 13mm
• Capacity: 600mAh
• C value: 20C
• Burst: 40C
• Connector: AEP connector system
• LiPo type AEP suitable for the Cyma AEP series - CM.121, CM.122, CM.125, CM.127, CM.128 series without MosFet